Gutter Guard Cost in NJ

Price ranges for gutter guards

Researched New Jersey market ranges, gathered from published contractor price guides and national cost surveys in October 2026. They are not our quote: your price comes from a free on-site estimate, and we will replace these ranges with our own rates.

• Micro-mesh gutter guard (stainless mesh), installed: $7 to $40.50 per linear foot, typically about $10
• Reverse-curve / surface-tension (helmet-style) guard, installed: $12 to $60 per linear foot, typically about $41.22
• Screen / perforated aluminum guard, installed: $3 to $12 per linear foot, typically about $7
• Foam insert guard, installed: $1 to $4 per linear foot, typically about $2.50
• Brush guard, installed: $3 to $3 per linear foot, typically about $3

Guard type sets the range

The material is the biggest single factor. Foam inserts and brushes sit at the bottom of the table, with foam starting as low as $1 per foot. Screens are a step up, with a typical price of $7 per foot. Micro-mesh, with a typical price of $10 per foot, and reverse-curve covers run higher because they use rigid frames and heavier materials and are fastened more carefully.

The wide spread inside each row reflects quality. A light mesh that snaps into the gutter costs far less than a stainless mesh on an aluminum frame that is screwed to the gutter lip.

Length, height and roofline

Total footage drives the bill, so a long ranch and a compact colonial can cost about the same. Height adds labor: second- and third-story runs need more ladder setups and slower work. Each inside and outside corner needs guard pieces cut and fitted, and steep or complicated rooflines take longer than a plain gable.

The condition of the gutters underneath

A guard is only worth installing on gutters that drain. Expect a quote to include a cleaning first, and possibly resealing seams, resetting loose hangers or correcting pitch. Those items are priced separately in the gutter repair cost guide. If the gutters are worn out, pricing new gutters and guards together often makes more sense than covering an old system.

How to read a guard quote

• The guard type and material named, not just a style description.
• The number of linear feet covered, matching the gutters on the house.
• Whether cleaning and flushing before installation are included.
• Any repairs listed as separate lines, so you can see what each costs.
• How the guard attaches and whether the roof edge is left undisturbed.

Guards compared with paying for cleanings

Guards cost more up front than a single cleaning but cut how often the gutters need attention. Under heavy oak, maple or pine cover, where two or more cleanings a year are normal, they tend to pay back. On an open lot with one easy cleaning a year, a cleaning may stay cheaper. To price both for your house, book a free estimate.